Sat priority switch distributes / switches 1 LNB to 2 satellite receivers

This process switch enables you to connect two satellite receivers to a coaxial line simply by mounting it; this is also referred to as a master/digital and a slave/analog connection.

The first receiver is connected to the so-called master/digital output and thus determines the LNB output. The second receiver is connected to the slave/analogue output and can only determine the LNB output or program switching if the first receiver is in stand-by mode or switched off completely.

Function:
Install the priority switch between SAT-LNB and 2 SAT receivers in the following order:

1. Connect the MASTER SAT receiver (1) to the connection (OUT MASTER - OUT DIGITAL). This determines the program switch and thus the switching of the LNB.

2. Connect the SLAVE SAT receiver (2) to the connection (OUT SLAVE - OUT ANALOG). The receiver connected here determines the program change / LNB switching only when the MASTER SAT receiver is switched off or in stand-by mode, i.e. when there is no voltage at (OUT MASTER - OUT DIGITAL)

Receiver OFF/standby fixed at 0 DC!
Switching signals 13V/18V, 22KHz ON/OFF, DiSEqC from receiver 1/2
Freq. Range: 950~2400MHz